Product Description
Bellator Plate Carrier
Made in the USA Plate carrier:
- Fits M-XL
- Water Resistant
- MOLLE webbing on inside of cummerbund for attaching side plates (side utility pouch required)
- Berry Compliant (made from start to finish with American-made materials)
- 92 weight thread
- Accomodates 10×12 plates front and back (will not accept ESAPI)
- Accomodates 6×6 side plates (MOLLE side plate utility pouch required)
- Mil-spec 1000D Cordura
- Closed cell foam pads (no odor)
- Duragrip hook & loop
- Shoulder pads have loops for equipment and/or hydration tube
- Includes plate carrier pad (not shown)
- Made in USA
THREAT LEVEL: Level III+ WEIGHT/THICKNESS: 4.7lbs./ <1 Inch
SIZES: 10 inches x 12 inches Multi Curve
COMPOSITE: PE and Kevlar Backing with DI-NOC carbon fiber cover
THREATS: 6 shots from 7.62 x 51 M80 Nato Ball, 5.56 ball
Projectile, 7.62 x 39 PS 1941 Ball (Mild steel core), 7.62 x 39 lead (ball) core projectile, M855 Green Tip
| Threat Caliber | Bullet | Velocity FPS | Rifle |
|---|---|---|---|
| .308 FMJ (7.62x51mm) | 149gr M80 | ~2,750 | M-14, AR-10, SCAR-17 |
| .223 (5.56x45mm) | 62gr M855 (Green Tip) | ~3,030 | M-16/ AR-15 |
| .223 (5.56x45mm) | 55gr M-193 | ~3,200 | M-16/ AR-15 |
| 7.62 x 39mm | Mild Steel Core | ~2,430 | AK-47/SKS |
Features & Benefits
• Hard armor rifle plates tested to meet NIJ 0101.04/05 Standards.
• High performance composite designs for reliable performance and comfort.
• Durable DI-NOC finish for protection against environmental wear and tear.
• Available in 10”x12”
• Improved range of motion with shooter’s cut style.
• 5-year ballistic material warranty/ 18-month workmanship.
Plates are interchangable front and back.
**Do not expose to extreme heat temperatures (over 150F). Does not permanently degrade armor **
100% Made in the USA
Choose Level IIIa, Level III, or Level IV
Level IIIa Stops: .44 Magnum, 9mm FMJ, 7.62×25, 5.7×28, .50AE and other specialty pistol rounds and provide up to 40% blunt trauma reduction when worn in conjunction with a rifle plate. Knife resistant to both stabs and slices. Besides being light (under 1 lbs), these inserts are soft and comfortable and just over 1/4″ thick. They are made of Kevlar KM2 and Goldflex II for really good stopping power for fragments and point blank shots and are thinner and lighter than standard Kevlar.
Level III Stops: 5.56 (M855, M193); 7.62×39 (Ball), 7.62x54R (LPS), 7.62×51 (Ball); 30-06 (JHP, FMJ); .357 mag; .45 cal; 50 cal Beowulf; 9mm; 12 Gauge Shotgun slugs, and more. All of these rounds were fired from semi-auto AR-15s, AK-47s, MAK-90s, bolt action Rifles, Glocks, Revolvers, and pump shotguns. This is a level III+ plate as tested by HP White, a certified NIJ Laborato
ry.Complies with MIL-46100 Rev E. for class 1 armor and passed the test against a 30 Caliber Armor Piercing bullet at 2426 fps as tested at the US Army Aberdeen Test Center. Weight for 10×12 single curve with 1/4″ polyurea anti-frag coating is 9lbs.
Level III+ Lightweight Stops: 5.56 (M855, M193); 7.62×39 (Ball), 7.62×51 (Ball); .357 mag; .45 cal; and common handgun rounds as well as shotgun slugs and buckshot. This is a level III+ plate as tested by Chesapeake Testing Laboratory. Complies with NIJ-STD-0101.06. Laboratory tested to stop the M855 and the M80. Weight is approximately 4.5 pounds. This is a Multicurve plate similar to ESAPI, but slightly different in dimensions (10×12″).
Level IV Stops: Everything Level III stops PLUS Armor Piercing, including: 5.56 (M193, M855, SS109); 7.62×39 (Ball,Steel Core/Armor Piercing Incendary (API)), 7.62×51 (Ball), 7.62x54R (L/LPS/B-32 (API)), 7.62 x 63 (JSP/AP M2) plus all pistol rounds and lesser rifle rounds. All fired from M-1, SVD Dragunov, FN FAL, AK-47, AR-15.
10×12 single curve = 7.72lbs.; ESAPI Medium = 7.9lbs; ESAPI Large = 9.17lbs
This plate is multi-hit rated up to 20 hits against an AR-15 M855. This plate is NIJ Certified and w
e are listed on the NIJ Compliant Armor list. https://www.nij.gov/topics/technology/body-armor/Pages/compliant-ballistic-armor.aspx
Side plates are available in Level III & IV. Price for side plates includes the required side plate utility pouches.
*The Bellator does not accept: BALCS or Multi-Curve or SAPI/ESAPI armor.
Reviews
There are no reviews yet.