LifeSaver C2

Description

LifeSaver C2 Community Water Purifier

(Please call Joshua Griswold at 800-627-3809 for a freight quote)

Designed for large scale community water provision, ideal for schools, hospitals, refugee camps and other community spaces. The LifeSaver C2 is a community-led large scale water purification solution that delivers 1 million litres (per set of filter cartridges) of clean water — providing clean, safe water for 300 people for 6 years if used daily. Suitable for environments where traditional infrastructure is lacking or insufficient, the LifeSaver C2 water purification system is an integral water provision supply shared by all members of a community.

The C2 tank holds 750 litres of water at one time and can be connected to a rainwater harvesting system to ensure a constant supply of clean drinking water. Microbiologically clean water produced from the tank can be used for drinking, washing, cleaning and cooking.

Trusted by international aid agencies around the World, the LifeSaver C2 water purification solution can be rapidly assembled in 1 hour — ideal for emergency situations where clean water is required immediately.

Building a Stand

The LifeSaver C2 is provided with schematics for an aluminium or steel stand and steps  that can be built to support the water tank allowing it to be used on a variety of surfaces. The stand has been designed to exceed UK Health and Safety and Working from Height Regulation Inspection Standards.

• Purifies up to 1 million litres of clean drinking water per set of filter cartridges
• Removes:
  • Virus – 99.99%
  • Bacteria – 99.9999%
  • Cysts – 99.99%
  • Microplastics – 99.99%
• Stores up to 750 litres of water at one time
• Provides a community with daily clean safe water for up to 6 years
• Fast flow rate – water flows at a rate of 12 litres per minute
• Can be rapidly assembled in 1 hour
• No chemicals or electricity required
• Product materials and water effluent are both BPA and BPS free
• FailSafe technology*** – Once the filter membranes are blocked, water can not pass through, keeping users safe
• Independently tested to meet an adaption of NSF/ANSI P231 water purification drinking water standards

For smaller communities the LifeSaver C1 is compact enough to sit on a worksurface or table in a utility room or out building.

 

• LifeSaver’s largest filtration unit (fits on the back of a flatbed truck)
• Capacity 750 litres, purifies up to 1,000,000 litres of safe, clean drinking water
• Removes : Viruses 99.99% Bacteria 99.9999% Cysts 99.99% Microplastics 99.99%
• Replaceable filter cartridges
• Fail safe technology
• No chemicals or electricity required
• Dual taps with flow rate of 12L per minute
• One C2 will provide 300 people with daily, clean water for 6 years
• Ideal for rural communities, hospitals, schools, farms, rural health centres, off grid living

 

***What does LifeSaver mean by ‘FailSafe’ technology?

We talk a lot about FailSafe technology but what does that mean exactly?

Like many of our competitors, LifeSaver products rely on hollow fibre membranes to filter out contaminants. Most water filters use membranes with a pore (hole) size of 0.1 or 0.2 microns (100 or 200 nanometres). At this size, they will safely block out protozoa, bacteria, and some microplastics, but not viruses, which are much smaller; some waterborne viruses can be as small as 0.02 micron (or 20 nanometres). The membranes we use in our LifeSaver water purifiers have a pore size of approximately only 15 nanometres or 0.015 microns which will effectively block viruses.

Failsafe solution

As our filters approach the end of their life, the pores in the membranes begin to block up; you’ll notice a reduction in water flow and it will become harder to pump. Eventually every single pore will be blocked and even water molecules won’t pass through. You cannot drink dangerous water from a LifeSaver product when the cartridge needs replacing because it stops letting water come through! It’s because of this feature that we call our products FAILSAFE. Whilst this might seem like a downside (as you’ll need a replacement cartridge), it’s an incredibly important indication that your product isn’t working anymore.

Replacement Cartridges

All our products have replaceable filter cartridges, but you won’t need one very often. The LifeSaver Bottle will safely purify up to 6,000 litres of water; in theory – based on an individual drinking two litres of water every day – that means that the filter could last over eight years! In reality of course, it will depend on just how dirty your water source is. Clear-looking water from a fast running stream or river will likely have less to clog up the filters than muddy ditch water. And you may need more water each day if you are camping (for washing or cooking) or traveling in a hot climate, but, the point is, if you carry a spare cartridge, you probably won’t need to use it for a very long time.

Unbeatable performance

There’s a reason why we supply the UK, US and other military forces around the world. Coupled with the fact that LifeSaver water purifiers block viruses AND are fully tested to NSF P231 standards, our FailSafe technology puts us ahead of all other portable water filters on the market.

Whether your next adventure is an afternoon of fishing on a local lake, a brisk hike to the nearest hill top, or a two-month overlanding trip across Asia, our water purifying products will help keep you safe.

Download Test Results:

Lifesaver-C2-Certification

Download Product Manual:

LifeSaver-C2-Instruction-Manual-1