Solar One 1690 AH

2100 80%-deep cycles over 10-year warranted service life means more cycles and usable battery capacity in Renewable Energy service.

10 year warranty: . It is the original and still the Best Warranty in the Renewable Energy industry and it just got even better, 7 years free replacement, 3 years prorated

Slightly enlarged epoxy coated steel case enables each battery cell to be removed for Easy On-Site assembly.

A Lifetime jar-to-cover heat seal Guarantee is possible due to the “welding” of the cell jar to the cell top.

Lead plated copper intercell connectors with stainless steel connecting hardware are included with every Solar-One to ensure Maximum Energy Transfer, reduce corrosion and maintenance.

Free shipping in continental United States adds even More Value to the Solar-One.

ISO-9000 Certified manufacturing plants and process assures you of batteries made to the high international Quality standards.

Solar-One uses a special patented recipe to achieve Even More Extra Life at deeper cycles than the competition.

Solar-One uses flip top caps that Reduce Maintenance time.

Solar-One is available in 8 sizes which reduces, or in many cases eliminates Unnecessary Paralleling.

Solar-One batteries have been in RE service for over 10 years yielding an extremely good track record with less than a 1% Cell Failure rate.

The Design Advantages Are Built-Into every Solar-One with Hup Technology!

Take a look inside:

• A computerized casting results in less flash and better crystallization during the grid molding process. The advantage is  stronger, thicker positive grids that are less susceptible to corrosion. The Hup positive grid is the heaviest in the industry.

   

• The Hup grid design allows for the maximum amount of active material in each plate. This allows for greater utilization of the active material for a stronger, more consistent performance and increased capacity.

   

• Hup’s exclusive 5-layer wrap is a process of horizontal and vertical plate wrapping which provides additional protection against shedding of the positive active material.

   

• The negative plate is designed with a staggered grid pattern. A perfect match for the heaviest positive plate, the staggered grid provides for the greatest amount of active material.
   

 TOP

 TOP

Estimated cycles to 50% DOD 4000

Battery Type Flooded Lead-Acid

Positive Plate Tetrafluoroethylene (Teflon®) /Lead Antimony

Post-to-Cover Seal Burned Post to Cover

Cell “Jar” Material Injection Molded Polypropylene

Cell Cover Material Polypropylene

Can Material Epoxy Coated Steel

Intercell Connectors Lead-Plated Copper Rated @ 700 Amps

Specific Gravity @ 77°F 1.280 +/- 5 points 100% Charged 1.160 80% Discharged

Shipping Weight: Add approximately 50 lbs for 12 and 24 volt orders and 100 lbs for 48 volt orders

Solar-One OUR PRICEs

FREE SHIPPING IN THE LOWER 48!!!

Most models ship within two business days from order

The Solar-One warranty as it pertains to records, only requires that "reasonable records be kept". Use your best judgment.

Weekly

1. Record hydrometer reading of pilot cell (the cell with the lowest specific gravity when you first received the battery. Once a year select a different cell to be the pilot cell)

2. Check the water level of all cells (add as needed.) Use ONLY DISTILLED WATER! Using tap or well water will void your warranty.

3. Record Amp/Hrs consumed.

4. Inspect connections for corrosion (clean as needed.)

Bi-Monthly (Every other month)

1. Record hydrometer readings of all cells (after the battery is fully charged.)

A. If the average readings are less than 1.275 – 1.285 check all charging sources and adjust as needed.

B. If one or two cells read 20 points more or less than the average, circle those readings and check for improvement at next monthly reading. If the low cells do not improve, the cells are in need of an equalize charge, specific gravity adjustment or internal inspection.

2. Check water level (add as needed.) Use ONLY DISTILLED WATER! Using tap or well water will void your warranty.

3. Record Amp/hrs consumed.

4. Record battery temperature.

5. Clean battery with a damp cloth. (If battery tops are wet with acid, use neutralizing agent with a clean paint brush, rinse and dry thoroughly.)

6. Equalize the battery

7. Inspect connections for corrosion (clean as needed)