Product Description
50 foot Whisper guyed tower kit for Whisper 100/200 (H40/H80). Does not include pipe and anchors.
Southwest Windpower Whisper Tower – 50 Feet Guyed Tower Kits for the Whisper 100 & 200 |
|||||||||||||||||||||||||||||||||||||||||||||
|
Part | Quantity | Part | Quantity |
Tower Base | 1 | 3/8” Carriage Bolts | 8 |
Upper Guy Wire Set | 1 | Tower Insert | 1 |
Middle Guy Wire Set | 1 | Pivot Bolt and Nut | 2 |
Lower Guy Wire Set | 1 | Turbine Mount Coupler | 1 |
3/8” x 2 ½” Bolts | 10 | Tower Base Coupler | 1 |
3/8” x 4” Bolts | 10 | Gin Base Coupler | 1 |
3/8” Lock-nuts | 28 | Gin Pole Top Piece | 1 |
Cable Thimbles | 12 | 4 link Chain | 1 |
Cable Clamps | 36 | Straight Connecting Link | 1 |
Rope | 100ft | Pear Connecting Link | 1 |
Note: Kit Contents may change without notice.
50′ Tower Kit Components
Necessary items not included in this kit:
Anchors
Tubing or Pipe for Tower
Ground Rod and Clamp
Lightning Arrestor*
Electrical Wire
Wire Connectors (preferably copper split bolts)
Pipe Insulation (to prevent wire “rattle” inside pole) *
Electrical tape or heat shrink tubing
Lifting Cable or Rope (2,000 lb. (950 kg.) strength x 100 ft. (30m))
Vehicle or Winch*Optional items
Specifications
- Pole Lengths: 2×15′, 1×20′
- Gin Pole: 19′
- Guy Radius: 26′
- Auger Size: 48" (not included)
- Anchor Hole: 2′ diameter x 3′ deep x 10" concrete
Pipe Requirements
Tower Kits use 2.5" CQ40 fence pipe (available from any chain link fence company) or 2.5" schedule 40 water pipe (fence & water pipe actual outer diameter is 2.875"). For detailed assembly instructions, see the Tower Manual in PDF format below.
Raising the tower with a gin pole, wind generator in place
Watch the video! "How to Raise the Wind Turbine"
Reviews
There are no reviews yet.