Team, mobile STANDARD – LifeSaver Jerrycan

Description

The LifeSaver Jerrycan (SKU JGA300) is a portable water purifier and storage can in one, a jerrycan for water that filters as you pour. It holds 4.9 gallons, filters up to 5,300 gallons of fresh water, and is rated to remove viruses, bacteria, cysts and microplastics. It’s our STANDARD water package for families and small teams who need clean water at home, in a vehicle, or at a campsite.

Why This LifeSaver Jerrycan Package

Water filters are where a lot of families go wrong. They buy a small filter, put it in a drawer, and never learn it doesn’t stop viruses. Chris saw this happen again and again. That’s why our team and vehicle water package starts with a purifier that handles viruses, not just bacteria.

The Jerrycan also stores water. Fill it from a creek, a rain barrel or a pond, pump the handle, and pour clean water from the tap. No tablets, no boiling, no power.

How Much Water Will It Make?

One LifeSaver filter cartridge purifies up to 5,300 gallons. A common planning rule is one gallon of water per person per day. At that rate:

• 1 person: about 5,300 days
• Family of 4: about 1,325 days, or more than three and a half years

Actual output depends on how dirty or cloudy your water source is. Muddy water clogs any filter faster.

What’s Included

• LifeSaver Jerrycan (18.5 liters / 4.9 gallons)
• Ultrafiltration (UF) filter cartridge, pre-installed
• Activated carbon disc (good for about 500 liters / 132 gallons)
• Pump and tap
• Flush cap for cleaning the filter
• Instruction manual

LifeSaver Jerrycan Specs

Spec	Detail
Brand	LifeSaver (Icon LifeSaver, UK)
Model / SKU	LifeSaver Jerrycan, SKU JGA300
Storage capacity	18.5 L / 4.9 US gal
Filter capacity	Up to 20,000 L / 5,300 US gal per cartridge
Virus reduction	>99.99% (Log 4)
Bacteria reduction	>99.9999% (Log 6)
Cyst reduction	>99.9% (Log 3)
Filter type	Ultrafiltration (UF) plus activated carbon disc
Flow rate	About 4 L/min (about 1 gal/min)
Dimensions	13.75 x 6.7 x 18.75 in
Dry weight	3.9 kg / 137 oz
Power or chemicals	None needed
Warranty	2 years (manufacturer)

Reduction figures are from LifeSaver’s independent lab testing to the NSF P248 protocol.

How to Use the LifeSaver Jerrycan

1. Prime the filter cartridge before first use, following the manual.
2. Fill the can with fresh water from your source.
3. Pump the handle to build pressure.
4. Open the tap and fill your bottle or pot.

LifeSaver recommends keeping untreated water in the can and filtering it as you need it. Filtered water stored in another container can pick up germs again.

Built-In Fail-Safe

When the cartridge reaches the end of its life, water stops flowing. You won’t drink unfiltered water by mistake. Replacement cartridges and carbon discs are sold separately, and our PREMIUM team package adds spares so you’re covered for years.

Frequently Asked Questions

What is a LifeSaver Jerrycan?

It’s a 4.9-gallon water can with a built-in ultrafiltration purifier. Fill it with fresh water, pump the handle, and clean water comes out of the tap. One cartridge purifies up to 5,300 gallons.

Does the LifeSaver Jerrycan remove viruses?

Yes. In independent lab testing to the NSF P248 protocol, the LifeSaver Jerrycan removed more than 99.99% of viruses, 99.9999% of bacteria and 99.9% of cysts.

How do I prime the LifeSaver Jerrycan?

Prime the filter cartridge before first use by following the steps in the LifeSaver manual, which are also shown in LifeSaver’s how-to video. Once primed and stored correctly, the cartridge lasts until it reaches its filter capacity.

How do I clean the LifeSaver Jerrycan?

Use the included flush cap to clean the filter, following the steps in the manual and LifeSaver’s cleaning video. Clean it regularly and whenever flow slows down.

Where can I get a replacement filter for the LifeSaver Jerrycan?

LifeSaver sells replacement ultrafiltration cartridges and 5-packs of carbon discs for the Jerrycan. Our PREMIUM team water package includes spares, or ask us about adding them to your order.

Will it fit my vehicle’s jerrycan mount?

It’s close to standard military jerrycan size, but its edges differ, so some mounts won’t fit. Check your mount’s dimensions against 13.75 x 6.7 x 18.75 inches before you buy one.

Get Ready – Stay Ready.