Product Description
30 foot Whisper guyed tower kit for Whisper 100/200 (H40/H80). Doesn’t include pipe and anchors. CALL FOR SHIPPING QUOTE
Southwest Windpower Whisper Tower – 30 Feet Guyed Tower Kits for the Whisper 100 & 200 |
|||||||||||||||||||||||||||||||||||||||||||||
|
Part | Part | Quantity | |
Tower Base | 3/8” Carriage Bolts | ||
Upper Guy Wire set | Tower Insert | ||
L Pivot Bolt and Nut | Pear Connecting Link | ||
Lower Guy Wire set | Turbine Mount Coupler | ||
3/8” x 2 ½” Bolts | Tower Base Coupler | ||
3/8” x 4” Bolts | Gin Base Coupler | ||
3/8” Lock-nuts | Gin Pole Top Piece | ||
Cable Thimbles | 4 link Chain | ||
Cable Clamps | Connecting Link | ||
Rope |
Note: Kit Contents may change without notice.
30′ Tower Kit Components
Necessary items not included in this kit:
Anchors
Tubing or Pipe for Tower
Ground Rod and Clamp
Lightning Arrestor*
Electrical Wire
Wire Connectors (preferably copper split bolts)
Pipe Insulation (to prevent wire “rattle” inside pole) *
Electrical tape or heat shrink tubing*Optional items
Specifications
- Pole Lengths: 1×13′, 1×17′
- Gin Pole: 15′
- Guy Radius: 20′
- Auger Size: 48" (not included)
- Anchor Hole: 2′ diameter x 3′ deep x 9" concrete
Pipe Requirements
Tower Kits use 2.5" CQ40 fence pipe (available from any chain link fence company) or 2.5" schedule 40 water pipe (fence & water pipe actual outer diameter is 2.875"). For detailed assembly instructions, see the Tower Manual in PDF format below.
Raising the tower with a gin pole, wind generator in place
Watch the video! "How to Raise the Wind Turbine"
Reviews
There are no reviews yet.