Sun Mar CENTREX 3000 NE

$2,475.00

Additional Components

Pay Over Time with Bread Pay™
 
SKU: CEN3000A/FNE Category: Tags: ,

Description

The Centrex 3000 NE utilizes a continuous flow design for very heavy cottage or medium residential use. With a continuous flow system, rotation of the drum moves compost along the larger and longer 3000 series drum, before it drops automatically into the collection housing at the end of the unit. Under normal operating conditions the drum will not have to be turned backwards for emptying.

 

The Centrex 3000 NE (Non-Electric) is the non-electric version of the Centrex 3000 which is fitted with a 4″ vent stack. Installation of a 12 Volt fan is optional, but it is recommended for heavy seasonal, residential use, or where the installation is particularly subject to downdraft, being surrounded by high trees or hills. We also recommend the fan if you need to install a bend in your vent stack.

 

All Centrex 3000 series units are supplied with a 1″ drain hose which should be connected to the 1″ drain at the bottom left of the unit.  This unit is for use with a Sealand low flush toilet, purchased separately. More than one toilet may be installed on this system, as shown in the picture.

Capacity
Listed capacities refer to the amount of people, on average, using the unit per day. Do not pick a unit that is below your capacity.
Residential/Continuous (Adults/Families) 5 adults or families of 7
Seasonal/Vacation (Adults/Families) 8 adults or families of 10
Electricals
Electricals must be connected while the unit is in AC use for proper operation
Maximum Amps (With Heater On) N/A
Fan Watts (Required or Optional Hookup) 2.4 Optional
Heater Watts (When Thermostat switches it on) N/A
Average Power Use in Watts (Heater on 1/2 time) N/A
Vent & Drains

 

Vent Pipe 4″ PVC Thinwall
1″ Drains (Required or Optional Hookup) Required
Weights (Lbs.) & Dimensions

 

Unit Height – Depth – Width (including collection housing 13 1/2″) 29 1/4″ x 27 1/2″ x 71″ by 27″
Product Weight/Shipping Weight 102-172
Shipping Carton Dimensions (W by L by H) 28″ by 60 1/2″ by 33″
Depth Required to Remove Drawer 45 1/2″
Height to Top of Waste Inlet Assembly 31 1/2″
Vent Inlet Center Distance From Rear – Left Side 19 1/4″ – 37 1/4″
Waste Inlet Diameter (including flange) 3″ DMV
Vent Inlet Center Distance From Rear – Left Side 33″ (top)