MAGNUM ENERGY MSH4024M 4000W 24V INVERTER/CHARGER shipping included
Original price was: $2,899.00.$2,325.00Current price is: $2,325.00.
Description
The MSH Series Inverter/Charger from Magnum Energy is a new pure sine wave hybrid inverter that combines the tried and tested engineering of Magnum’s MS technology to make it an optimal choice for your mobile, renewable and back-up power needs. The MSH Series is powerful, easy-to-use, and best of all, cost effective. There are two lines available in MSH hybrid version – renewable energy (RE) and mobile. The mobile series has one 60A AC input, whereas the renewable energy version has two 60A AC input – one for the grid and the other for the generator. The new MSH-M pure sinewave mobile models add a “Load Support” feature. Load Support allows incoming AC to synchronize with the inverter’s output and uses additional power from the batteries to power loads. Two mobile models are available – a 3000W and a 4000W. These have have neutral ground switching and are intended to be used for land vehicles (RVs or trucks) or marine craft. The Renewable Energy (RE) model is intended to be used for residential or commercial applications.
The MSH Series is ETL listed to the stringent requirements of UL/cUL 458 for mobile use and UL/cUL 1741 for renewable energy use.
Features
Hybrid technology – Most inverters only use one source of energy to power loads, either from incoming AC power utility or AC generator or from the batteries. The MSH series combines the energy from both sources to power loads. This allows the inverter to recharge the batteries when there is surplus power or deliver more power to the loads if they require more than the AC input can supply itself.
Load support – Load support parallels the inverter output with incoming AC source allowing it to run larger loads from smaller generators.
The MSH Series Inverter/Charger is loaded with features:
Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.
Versatile mounting: Mount the MSH Series on a shelf, bulkhead, or even upside down.
Interchangeable: The MSH series is interchangeable with Magnum MS Series and use the same accessories as the MS series.
Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.
Multiple ports: The MSH Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.
Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.
Convenient switches: The MSH Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.
Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty.
Accessories and Options
Remote control For convenient finger-tip operation, including the new one-knob™ programming, available in standard and advanced versions.
Automatic Generator Startup: Automatically starts and stops your generator based on temperature or battery voltage, available in standaloneand network versions.
Magweb Wireless Monitoring: The Magweb wirelessly communicates with Magnum Energy’s inverters and accessory including the inverter, automatic generator start, and battery monitor. your generator based on temperature or battery voltage.
Specifications
Model |
MSH4024RE
|
MSH3012M*
|
MSH4024M*
|
|
Inverter Specifications | ||||
Input Battery Voltage
|
18 – 34 VDC
|
9 – 17 VDC
|
18 – 34 VDC
|
|
Nominal AC output voltage
|
120 VAC
|
120 VAC
|
120 VAC
|
|
Output frequency and accuracy
|
60Hz ± .05 Hz
|
60Hz ± 0.05 Hz
|
60Hz ± 0.1 Hz
|
|
Total Harmonic Distortion (THD)
|
< 5%
|
< 5%
|
< 5%
|
|
1 msec surge current (amps AC)
|
120
|
70
|
120
|
|
100 msec surge current (amps AC)
|
82
|
40
|
82
|
|
5 sec surge power (real watts)
|
5800
|
3900
|
5800
|
|
30 sec surge power (real watts)
|
5400
|
3800
|
5400
|
|
5 min surge power (real watts)
|
4900
|
3200
|
4900
|
|
30 min surge power (real watts)
|
4500
|
3000
|
4500
|
|
Continuous power output at 25ºC
|
4000 VA
|
3000 VA
|
4500 VA
|
|
Rated input battery current
|
267 ADC
|
400 ADC
|
267 ADC
|
|
Inverter efficiency
|
93.7%
|
90.0%
|
93.7%
|
|
Transfer time
|
16 msecs
|
16 msecs
|
16 msecs
|
|
Search Mode
|
< 7 watts
|
< 8 watts
|
< 8 watts
|
|
No Load (120 VAC output with remote)
|
25 watts
|
30 watts
|
25 watts
|
|
Waveform
|
Pure Sine Wave
|
Pure Sine Wave
|
Pure Sine Wave
|
|
Charger Specifications | ||||
Continuous Output at at 25 ºC
|
110 ADC
|
125 ADC
|
110 ADC
|
|
Charger efficiency
|
85%
|
87%
|
87%
|
|
Power factor
|
> 0.95
|
> 0.95
|
> 0.95
|
|
Input current at rated output (AC amps)
|
29
|
18
|
29
|
|
General Features and Capabilities | ||||
Transfer relay capability
|
60A AC
|
|||
Five stage charging capability
|
Bulk, Absorb, Float, Equalize, and Battery Saver
|
|||
Battery temperature compensation
|
With available temp sensor (battery temp 0 – 50 ºC)
|
|||
Remote inverter on/off switch
|
With available pigtail to connect to dry contact
|
|||
Internal cooling
|
0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
|
|||
Overcurrent protection
|
Yes, with two overlapping circuits
|
|||
Overtemperature protection
|
Yes on transformer, MOSFETS, and battery
|
|||
Conformal coating on PCB’s for corrosion protection
|
Yes
|
|||
Powder coated chassis & top for corrosion protection
|
Yes
|
|||
Stainless steel fasteners for corrosion protection
|
Yes
|
|||
Dual AC branch rated output breakers
|
No
|
|||
Listings
|
ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
|
|||
Warranty
|
Three years parts and labor
|
|||
Environmental Specifications | ||||
Operating temperature
|
-20 ºC to + 60 ºC (-4 ºF to 140 ºF)
|
|||
Nonoperating Temperature
|
-40 ºC to + 70 ºC (-40 ºF to 158 ºF)
|
|||
Operating Humidity
|
0 to 95% RH non-condensing
|
|||
Physical Specifications | ||||
Dimensions (l x w x h)
|
13.75″ x 12.65″ x 8.0″ (34.9 cm x 32.1 cm x 20.3 cm)
|
|||
Mounting
|
Shelf (top or bottom up) or bulkhead (vents up)
|
|||
Weight
|
58 lb (26.3 kg)
|
55 lb (24.9 kg)
|
55 lb (24.9 kg)
|
|
Max operating altitude
|
15,000′ (4570 m)
|
Reviews
There are no reviews yet.