Silvonic Nanoparticle Colloidal Silver Generator w/ Automatic Shut-off (Incl. TDS Meter) –

Description

The Silvonic 1G
One Gallon Ionic Colloidal Silver Maker.
Automatic and Powerful.

"First Aid Kit of the Future"
Made in USA. Lifetime Warranty.

The Silvonic 1G makes one Gallon (4 liters) of the finest Nano-particle Ionic Colloidal Silver in about 6 hours (at 10ppm). Automatically shuts off at desired strength. No bad batches!

Special Introductory offer only $395. (going up to $445 in 2014) with 4 Silver electrodes (99.99% pure will make approx. 400 gallons of 10 ppm CS)*, AC power supply, Magnetic Stirrer, and EC3 Conductivity Meter. Jar not included. 

Complete Silvonic 1G Kit.*      Requires less than 20 mA power!

The Silvonic 1G Colloidal Silver Generator makes the highest quality Ionic Colloidal Silver using 12 gauge 99.99% pure silver electrodes. It has variable PPM (Parts Per Million) settings and shuts itself off automatically when it reaches the desired strength. Using the SWAP method that alternates the current (AC), the electrodes will have very little build-up. It also has a manual mode switch for making stronger batches (for ointment, etc.)

This CS generator uses the most advanced circuitry available to the home brewer. The SWAP AC method produces the smallest size (.001 micron range) silver particles and the most ions. It also detects the concentration of silver in solution and stops at the target PPM (variable up to 25ppm). While you do not need a meter to make excellent CS, we include the EC3 with our Silvonic 1G kit. Use it to check your distilled water as well as the final result. NOTE: Some of the distilled water in stores does not meet our standards of purity! Test all water before making CS. If it has more than about 2 PPM, it will not make the best CS. If you can’t find acceptable distilled water, consider getting one of our countertop distillers.

We recommend 5-10 PPM CS for best results. Nano-particle CS works better than stronger solutions which typically have larger particles. Instead of making stronger CS,  just take more 5-10PPM! Topical uses like CS ointment can use 15-25 PPM CS.

Why you should have a TDS meter: In order to make CS with the smallest particles, the water should have no minerals or other contaminants. While the Silvonic lets you know if your water has an unacceptable level of minerals (aka Total Dissolved Solids), a TDS or conductivity meter, shows the quality of your water. You should also check your CS strength with a meter so that it does not exceed 10 PPM for internal use. We recommend 5-10 PPM for best particle size and ionic content. With this level of purity and size, using several ounces per day should not present a serious problem.

The new Silvonic 1G will make one gallon of 5-10ppm CS in around 6 hours automatically. Set it and forget it. You cannot ruin a batch! 

1 AC power supply. ($15 value)

1 auxiliary power cable for batteries, solar panels, etc.

Container not included. Use a suitable jar with at least 2.5" wide  mouth (usually available locally with spigot as a "Sun Tea" jar.). The electrode holder will cover a 4.5" opening. The electrodes sit down about 7" into the water.

Constant-Current and Constant-Voltage method for making the highest quality Ionic/Colloidal Silver Hydrosol. Fully automatic.

These units ease colloidal particles and ions into distilled water at a highly controlled rate. The resulting Silver Colloid and Ionic Solution (Silver Hydrosol) is very pure, stable and clear. It is NOT light sensitive.

The Silvonic uses DC surface mount Integrated Chip Logic Technology to control the process and shut itself down automatically when done. It uses a conductivity referencing circuit that continuously monitors the water electronically. Timers alone simply cannot work. The SWAP method eliminates build-up on the electrodes and the need for stirring. 

Each unit is individually machined and hand assembled from rugged heavy duty PVC and pre-tested for performance.

Lifetime Warranty:
Free replacement or repair for as long as you own it if it fails due to an electrical malfunction. Since you can’t hook it up wrong, only physically damaging it would cause it to fail.