CD V-717 Civil Defense High-Range Radiation Detection Survey Meter 0-500 R/hr range

CD V-717 Ion Chamber Survey Meter

The bottom half of the case contains the ion chamber and a removable spool with 25’ of cable. The 717, like the 715, was transistorized and had two controls: a zero adjust knob and a range switch.

The example shown here is a Model 1 manufactured by Victoreen.. I believe that this was the only version of the 717.

The purpose of this instrument is explained in the following quote from CPG 1-30 (FEMA 1981): “This instrument was designed for use by radiological monitors in WER stations during the early period following a nuclear attack. The purpose of the instrument is to decrease the radiation exposure to monitors by making it unnecessary for the monitor to leave his shelter in order to obtain an outside measurement.”

The term “WER” refers to the Weapons Effects Reporting stations which had previously been referred to as Fallout Monitoring or Fixed Monitoring stations. According to CPG 1-30, they are facilities with fallout protection, reliable communications, instruments and trained monitors that are designated for the collection and reporting of weapons effects and radiological data to the local Emergency Operating Center (EOC).

Range: 0 – 0.5, 0 – 5.0, 0 – 50, 0 – 500 R/h.

Response time: 95% of final reading in nine seconds, two minute warm up

Size: 4.5” x 9” x 7”

Weight: 5.25 pounds

Batteries: one 1.5 volt

Battery life: 150 hours of continuous use.

Materials:  the case is aluminum while the panel and handle are die cast zinc.

Manufacturers: Victoreen Inst. Co.,

The Bendix Corporation seems to have been involved in the initial development of this device. The 1961 Annual Report of the Office of Civil and Defense Mobilization stated: “the Bendix Corp. initiated the modification of a standard CDV-715 radiation survey meter to provide a remote detector attachment for measuring dose rates at some distance from the meter.” Similarly, an article in the January 1962 issue of Nucleonics indicated that this instrument was under development by Bendix and that the R&D designation being used was “CD-715BX”  (not 717BX).

The earliest reference that I have found to the CD V-717 is in the 1963 Office of Civil Defense annual report  wherein it is noted that 100,000 of these were ordered.

Since the specifications for the CD V-717 eliminated some of the problems encountered with the CD V-715, no retrofits were required.