SCHNEIDER ELECTRIC CONEXT AUTOMATIC GENERATOR START (AGS)

$169.95

Pay Over Time with Bread Pay™
 

Description

Schneider Electric
Conext Automatic Generator Start (for XW+ and SW Series)

The Conext Automatic Generator Start (AGS) can automatically activate or stop a generator in response to changing power requirements. An excellent addition to an off-grid or backup power system, the AGS seamlessly connects to the Xanbus network and shares status information with all other devices on the network. It can monitor a set of system user-programmable parameters such as battery voltage, state of charge or grid power and can activate the generator in response to any changes. The AGS can also be configured remotely using the Conext System Control Panel (SCP) or Conext ComBox to engage a generator, and can assist an inverter/charger when output power demands are high.

Parts Included: 1 network terminator; 1 Cat5 cable; 1 mounting plate; 4 #6 screws

FEATURES:

 

  • User-programmable trigger settings to meet specific application needs like battery voltage, exercise time, quiet time, SOC, inverter/charger AC power loads
  • Supports manual start and stop operation modes
  • Works with multiple Xanbus devices – Conext XW, SW, MPPT 60-150, MPPT 80-600, SCP, ComBox
  • Access and troubleshoot AGS device events using the Conext ComBox or SCP
  • Wall Mount
  • RJ45 connections for Xanbus network cables
  • Tested and qualified for harsh environmental conditions (HALT reliability testing)
  • 5 Year Warranty

 

ELECTRICAL /MECHANICAL CHARACTERISTICS:

SPECIFICATIONS
Nominal Voltage 15 VDC
Max Operating Current at Nominal Voltage 200 mA
Nominal 12/24 V thermostat input voltage/generator running B+ voltage 12 Vdc / 24 Vdc* = On
Min. 12/24 V thermostat input voltage/generator running B+ voltage 9.5 Vdc*
Max. 12/24 V thermostat input voltage/generator running B+ voltage 30 Vdc*
Typical 12/24 V thermostat input current/generator running B+ voltage 14.6 mA @ 12 V
IP rating / location IP20/indoor only
Network Protocol: Xanbus / Connectors: RJ45
Safety CSA 107.1, UL 458 4th Ed including Marine Supplement

*Limited to Class 2 levels (100 VA)

Reviews

There are no reviews yet.

Be the first to review “SCHNEIDER ELECTRIC CONEXT AUTOMATIC GENERATOR START (AGS)”

Your email address will not be published. Required fields are marked *