Surrette 12-CS-11PS, 12 volt 357 amp hour

Description

Surrette 12-CS-11PS, 12 volt 357 amp hour deep cycle battery
PRICES SUBJECT TO CHANGE WITHOUT NOTICE, SHIPPING EXTRA CALL FOR QUOTE

BATTERY TYPE – SOLAR DEEP CYCLE
NON BREAKABLE CONSTRUCTION
Volts: 12
Amp Hours: 357 at the 20 hour rate

Dimensions (LxWxH): 22″ x 11.25″ x 18.25″ / 559 x 286 x 464mm
Weight Dry: 220lbs. / 100kg
Weight Wet: 272 lbs. / 124kg

These batteries are sold wet with electrolyte. They can be ordered dry for no additional cost, but electrolyte is not included. Because batteries are hazardous, it is required that they be dry to transport them by aircraft. It is also desirable when exporting them to other countries. Please call to order if you need them shipped dry.

When exporting Surrette batteries overseas exporting crating is required. Export crating is 5% of the total cost of the batteries.

CONTAINER CONSTRUCTION
INNER CONTAINER Polypropylene
INNER COVER Polypropylene – Heat Sealed to Inner Container
OUTER CONTAINER High Density Polyethylene
OUTER COVER High Density Polyethylene
Snap to fit Outer Container with Molded Handles

PLATES PER CELL 11
ELECTROLYTE RESERVE ABOVE THE PLATES: 3.625″ / 92.08 mm

DESIGN CRITERIA
10 YEAR WARRANTY
3300+ CYCLES
12 – 15+ YEAR LIFE

POSITIVE PLATE DIMENSION – FLAT TYPE LEAD ANTIMONY
HEIGHT 273 mm 10.750 Inches
WIDTH 143 mm 5.625 Inches
THICKNESS 6.73 mm 0.265 Inches

NEGATIVE PLATE DIMENSION – FLAT TYPE LEAD ANTIMONY
HEIGHT 273 mm 10.750 Inches
WIDTH 143 mm 5.625 Inches
THICKNESS 4.70 mm 0.185 Inches

INSULATION
Positive Plate wrapped with Vertical Slyver Glass Mat and Enveloped with 0.105″ Heavy Duty Separator

TERMINALS
Flag with Stainless Steel Nuts and Bolts

CAPACITY

“SOLAR” Series 5000

Rolls Battery, based in Salem, MA, has been manufacturing deep cycle batteries for more than 40 years. Our Series 500 system of batteries, manufactured specifically for SOLAR and other renewable energy applications, are designed to offer up to 20 years of life thanks in part to their “Non-Breakable”, dual container (modular) construction.

Features

• Dual Container Modular Construction.
• Coupling of our thick plate design with highest density active material.
• Enveloped Separators
• Increased Liquid Reserve

SPECS AT A GLANCE
Voltage: Various
Plate Alloy: 4% Antimony
Post Type: Flag (Typical)
Chg Volt: Float 2.2 -2.3 VPC Bulk 2.37 -2.40 VPC
Sp.Gravity: 1.265
Electrolyte: Sulfuric Acid

Benefits

• Elimination of “stray” current.
• Environmentally friendly.
• No acid leakage.
• Easy “on-site” assembly/disassembly. (No special tools or skills required.)
• Drastic reduction in connections, eliminating many points of failure, thus increasing charging efficiency.
• Unsurpassed cycling service – 15 years average life !
• Ability to remove sediment chamber, eliminating separator mis-alignment, treeing, and shorting.
• Allows for higher plates to be used in the same sized cell, thus yielding greater capacity.
• Less maintenance.