SHURFLO 9325-043-101 SUBMERSIBLE PUMP

Why should you get a controller with your pump? Well, they allow you to get more power out of your solar array, and allow you pump water earlier or later in the day, than you normally could. It gives you an increase of about 30% more flow than you would normally have. The controllers are designed to maximize solar powered submersible pumps. The Shurflo 902-100 Pump Controller is for 24V systems, and the Shurflo 902-200 Pump Controller is auto-sensing, can work with 12V or 24V systems. The 200 is also in a sealed waterproof box designed to operate in more extreme environments. So even on less than optimum solar days, you can get more consistent, reliable performance from your pump, when used with a controller.

Note: Do not use any SHURflo pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F). Not for use where flammable vapors are present.

Positive displacement 3 chamber diaphragm pumpPermanent magnet motor (P/N 11-175-00)12-24 VDC nominal, 4.1 maximum amps, 230 feet maximum lift (70 meters), 100 feet maximum submersion (30 meters), 1/2″ Hose Barb discharge port, 50 mesh stainless steel screen inlet, 3.0 degree cam, Net weight 6 Lbs. (2.7 Kg)

Features:

• Long -life 12-24 VDC operation
• For 4″ wells or larger
• Lifts water from wells up to 230′ deep
• Can pump up to 111 gallons per hour
• Quick disconnect with “Watertite-Gland” Design Pat Pend
• Corrosion-proof housing with stainless-steel fasteners
• Runs dry without damage
• 50 mesh stainless steel inlet screen to keep debris out
• Motor is sealed for long life and durability
• State of the art solid diaphragm